How To Use
Download Instructions: English | Spanish | Chinese
The first & only painless at-home laser that is FDA-Cleared & clinically proven to reduce wrinkles
Instructions for the NIRA Pro Laser Treatment
Cleanse
- Remove all makeup thoroughly.
- Cleanse and dry your face completely before beginning treatment.
Power On Device & Learn Reject Tone
- Turn on the device by pressing the power button.
- Identify the reject tone: While holding the device in front of you, briefly contact the device with your skin and immediately lift the device away from your skin. You will hear a low-pitched beep that indicates a rejection pulse.
- The rejection tone indicates that the device tip did not have full contact with the skin for the full treatment cycle. If you hear this tone, lift the device tip and place on the skin making sure there is full skin contact for the full treatment cycle.
Cleanse
- Remove all makeup thoroughly.
- Cleanse and dry your face completely before beginning treatment.
Power On Device & Learn Reject Tone
- Turn on the device by pressing the power button.
- Identify the reject tone: While holding the device in front of you, briefly contact the device with your skin and immediately lift the device away from your skin. You will hear a low-pitched beep that indicates a rejection pulse.
- The rejection tone indicates that the device tip did not have full contact with the skin for the full treatment cycle. If you hear this tone, lift the device tip and place on the skin making sure there is full skin contact for the full treatment cycle.
Cleanse
- Remove all makeup thoroughly.
- Cleanse and dry your face completely before beginning treatment.
Power On Device & Learn Reject Tone
- Turn on the device by pressing the power button.
- Identify the reject tone: While holding the device in front of you, briefly contact the device with your skin and immediately lift the device away from your skin. You will hear a low-pitched beep that indicates a rejection pulse.
- The rejection tone indicates that the device tip did not have full contact with the skin for the full treatment cycle. If you hear this tone, lift the device tip and place on the skin making sure there is full skin contact for the full treatment cycle.
Find Your Ideal Power Level
- Press and release the power button to adjust the the power level. Set your NIRA Pro to level 1.
- Place the device tip on the skin. The device will automatically fire the laser once. You will hear a series of 2 beeps. The first beep indicates the laser has begun firing. The second beep indicates the laser finished firing for that one spot.
- Move the laser, repeat this process and continue to increase the power level until you have reached a power level where you feel warmth without pain.
Find Your Ideal Power Level
- Press and release the power button to adjust the the power level. Set your NIRA Pro to level 1.
- Place the device tip on the skin. The device will automatically fire the laser once. You will hear a series of 2 beeps. The first beep indicates the laser has begun firing. The second beep indicates the laser finished firing for that one spot.
- Move the laser, repeat this process and continue to increase the power level until you have reached a power level where you feel warmth without pain.
Find Your Ideal Power Level
- Press and release the power button to adjust the the power level. Set your NIRA Pro to level 1.
- Place the device tip on the skin. The device will automatically fire the laser once. You will hear a series of 2 beeps. The first beep indicates the laser has begun firing. The second beep indicates the laser finished firing for that one spot.
- Move the laser, repeat this process and continue to increase the power level until you have reached a power level where you feel warmth without pain.
Treatment
- Using the chosen power level, hold the device tip against the skin beginning at the desired treatment area.
- Holding the device tip in place until you hear a series of two beeps approximately one second apart indicating that the pulse has been completed.
- Lift and move the laser so it is slightly overlapping the previous spot (See illustration for overlapping pattern).
- Follow the pattern shown in the illustration, repeat this process for 10 pulses on each desired treatment area. Once 10 successful pulses have been completed, you will hear a set of three fast-paced jingle-like tones that indicate the treatment for that eye is complete.
- Repeat this process for all desired treatment areas.
- Power down the device by holding down the power button until the power lights turn off. NIRA will automatically power down after two minutes without use.
Illustration of treatment pattern
CAUTION: Be sure to move the laser to a new spot for each pulse. If you apply treatment to the same spot twice in a row, the heat in your skin may build up to a point where you feel discomfort or pain. This is not recommended and should be avoided.
Treatment
- Using the chosen power level, hold the device tip against the skin beginning at the desired treatment area.
- Holding the device tip in place until you hear a series of two beeps approximately one second apart indicating that the pulse has been completed.
- Lift and move the laser so it is slightly overlapping the previous spot (See illustration for overlapping pattern).
- Follow the pattern shown in the illustration, repeat this process for 10 pulses on each desired treatment area. Once 10 successful pulses have been completed, you will hear a set of three fast-paced jingle-like tones that indicate the treatment for that eye is complete.
- Repeat this process for all desired treatment areas.
- Power down the device by holding down the power button until the power lights turn off. NIRA will automatically power down after two minutes without use.
Illustration of treatment pattern
CAUTION: Be sure to move the laser to a new spot for each pulse. If you apply treatment to the same spot twice in a row, the heat in your skin may build up to a point where you feel discomfort or pain. This is not recommended and should be avoided.
Treatment
- Using the chosen power level, hold the device tip against the skin beginning at the desired treatment area.
- Holding the device tip in place until you hear a series of two beeps approximately one second apart indicating that the pulse has been completed.
- Lift and move the laser so it is slightly overlapping the previous spot (See illustration for overlapping pattern).
- Follow the pattern shown in the illustration, repeat this process for 10 pulses on each desired treatment area. Once 10 successful pulses have been completed, you will hear a set of three fast-paced jingle-like tones that indicate the treatment for that eye is complete.
- Repeat this process for all desired treatment areas.
- Power down the device by holding down the power button until the power lights turn off. NIRA will automatically power down after two minutes without use.
Illustration of treatment pattern
CAUTION: Be sure to move the laser to a new spot for each pulse. If you apply treatment to the same spot twice in a row, the heat in your skin may build up to a point where you feel discomfort or pain. This is not recommended and should be avoided.
Hydrate
- Finish treatment with NIRA's all-natural Hyaluronic Acid Serum to lock in moisture and instantly smooth fine lines.
Hydrate
- Finish treatment with NIRA's all-natural Hyaluronic Acid Serum to lock in moisture and instantly smooth fine lines.
Hydrate
- Finish treatment with NIRA's all-natural Hyaluronic Acid Serum to lock in moisture and instantly smooth fine lines.
For Best Results:
Be patient! You should start to see lasting wrinkle improvements within 60 days of regular treatments. You should see good, long-lasting results within 90 days of use. Use the device daily according to the instructions for 90 days or more. You may use twice daily for possible enhanced results. We recommend waiting 1 minute before reapplying to each area. Do not treat more than twice within a 1-hour period.
Device Care:
The interior of the tip should be cleaned once a week with a cotton swab. Gently place the cotton swab into the opening on the Laser Aperture to clean the glass lens and remove any debris. If debris has fallen into the laser output window and it will not come out using the cotton swab, gently shake the device to let the debris fall out. Disinfect all surfaces with 70% alcohol solution between each use.
For Best Results:
Be patient! You should start to see lasting wrinkle improvements within 60 days of regular treatments. You should see good, long-lasting results within 90 days of use. Use the device daily according to the instructions for 90 days or more. You may use twice daily for possible enhanced results. We recommend waiting 1 minute before reapplying to each area. Do not treat more than twice within a 1-hour period.
Device Care:
The interior of the tip should be cleaned once a week with a cotton swab. Gently place the cotton swab into the opening on the Laser Aperture to clean the glass lens and remove any debris. If debris has fallen into the laser output window and it will not come out using the cotton swab, gently shake the device to let the debris fall out. Disinfect all surfaces with 70% alcohol solution between each use.